The Blackwire MultiView Pro tiler control app for Control4 provides easy to use tiling control. The app is supported on Control4 T4 Touch Screens, iOS/iPadOS apps, and Android devices. Easy and intuitive controls of four pre-configured layouts, AV source selection, and control of all 4 sources at the same time are included. No custom programming is required. Current integration with the following tiler systems:
- Just Add Power VBS-HDIP-759A 3G+4+ Tiler Transmitter
- Coming Soon – AVPro Edge MXNet 10G Transceivers
Just Add Power
Minimum required for Just Add Power integration:
- Just Add Power 759A Tiler on the B2.3.9 or greater
- At least 4 3G transmitters and 1 receiver
Note: the VBS-HDIP-759A will not pass digital audio so we recommend an additional receiver plugged directly into your AVR for audio processing.
Coming soon - AVPro MXNet 10G
Minimum required for 10G MXNet integration:
- MXNet 10G receiver for each display
- MXNet 10G transmitter for at least 4 sources
Note: this ONLY works on the 10 gigabit version of MXNet.