Flair Smart Vent 10×10

Flair Smart Vents give you Room by Room Control, eliminating hot and cold rooms while balancing temperatures out for evenness.

Color:

• Pearl White

Connectivity:

• 915MHz Radio for device to device communication
• Works with Flair Puck.

Power:

• Lasts for 3-4 years on two C batteries (included in box)
• 24VAC Port for optional wired installation

Mounting/Positioning Options:

• Floor mount – no screws needed
• Wall & Ceiling mount – battery cassette drops right in. No need to wire anything.
• If you are wiring it in, just press the wires into the terminal block on the back. Additional details will be included in the box.

Software:

• Software updates over the air (SPOTA)

What’s in the Box

• 1 x Smart Vent
• For Power: 2x C-Cell Batteries
• For Mounting: 2 x Screws

Eliminate hot and cold spots in your home. This is smart zoning made simple.

Save money by heating and cooling occupied rooms.

Independent temperature control for each room. This is home comfort made simple.

A Room with Too Much Airflow

Have a room that’s too cold in the summer and too hot in the winter? This room might get too much airflow. Start off with a Puck and a Smart Vent just for this room.

A Room with Too Little Airflow

Have a room that’s too hot in the summer and too cold in the winter? This room might get too little airflow. Place a Puck in this room, and then use Pucks and a Smart Vents for the other rooms.

Even out the Temperatures between

All Rooms You’ll need Pucks and Smart Vents for every room in your home. If you have ecobee Remote Sensors, you’ll need one Puck to bridge ecobee and Flair!

At least 1 puck is required for a system to function correctly.

Flair Puck

Read more