Flair Puck

Account Required
Log-In or Register to view pricing.
SKU: FLAIRPUCK001 Category: Brand:

The Flair smart vent system converts almost any home to a zoned central air system.  The system is made up of the Flair Puck which acts as the rooms thermostat and the Flair Smart Vent which controls the flow of the air in that room. 

Flair Puck

Enables temperature sensing in each room with a smart vent. 

Flair Smart Vent

Redirect airflow to the right rooms at the right time.

Room Level Control

Have a room that’s too hot or too cold?

Flair eliminates uneven room temperatures, balancing heating and air conditioning across your home. Replace as few or as many vents as you need to make any room comfortable.

Eliminate hot and cold spots in your home. This is smart zoning made simple.

Save money by heating and cooling occupied rooms.

Independent temperature control for each room. This is home comfort made simple.

Designing a Flair System

A Room with Too Much Airflow

Have a room that’s too cold in the summer and too hot in the winter? This room might get too much airflow. Start off with a Puck and a Smart Vent just for this room.

A Room with Too Little Airflow

Have a room that’s too hot in the summer and too cold in the winter? This room might get too little airflow. Place a Puck in this room, and then use Pucks and a Smart Vents for the other rooms.

Even out the Temperatures between

All Rooms You’ll need Pucks and Smart Vents for every room in your home. If you have ecobee Remote Sensors, you’ll need one Puck to bridge ecobee and Flair!

Icon indicates a temperature-reading device.

Can be a Flair Puck, ecobee Remote Sensor, or any compatible Smart Thermostat. At least one Flair Puck is required for every home

2-3 Vents are recommended for most systems. 

The Puck USB Mount is a great adapter designed to convert the back of the Puck to have a USB plug. This enables the ability to plug the Puck right into a USB outlet or wall plate. 

Flair has a detailed setup guide available on their support site