The Just Add Power VBS-HDIP-505POE Receiver is designed to add an HDMI Output into your video system. This receiver is capable of 1080P with HDCP 1.4
Lossless Audio is supported including Dolby Atmos.
The receiver is powered by POE but can optionally be powered by a power supply.
This Receiver can be set to run in 2G Mode allowing you to use this on older Just Add Power products.
Connections | |
---|---|
Ethernet | (1) Gigabit Input |
Power | Power via POE. Also has 4.7-23 Volt Input |
HDMI Output | (1) HDMI Output |
RS232 | (1) RS232 3.5mm for Control of display device or IR Module |
Installation | |
Size | 5.0″ W x 4.9″ D x 1.2″ H |
Audio Video Specs | |
Audio Capabilities | HDMI: Lossless Audio – Including Dolby Atmos |
Video Capabilities | 480P,720P,1080P |
Additional Specs | |
Mix and match | This is cross compatible with the 2G Series and 3G series. Mix and match to built the ultimate matrix |
RS232 | Drivers are available to turn this RS232 into an extension of your control systems |
CEC | CEC Drivers are available which can turn the TV on and off. |
2G Omega
505POE
1080P video and HDCP 1.4
All audio formats
Instant-seamless switching
Built-in video scaler
Video Wall
2-way RS232 control
IR control (Requires additional hardware)
Image Pull
Image Push
Power over Ethernet
CEC Control
2G Omega
515POE
1080P video and HDCP 1.4
All audio formats
Instant-seamless switching
Built-in video scaler
Video Wall
2-way RS232 control
IR control (Requires additional hardware)
Image Pull
Image Push
Power over Ethernet
CEC control
Analog Audio (2ch PCM) with Lipsync Adjustment
USB 2.0