Please update the firmware on your Shelly devices to the latest prior of installing or updating your Shelly driver to this version (3.0.4). As some features might not work with older firmware.
An All-In-One Control4 driver for all Shelly Dimmer/Switch/Relay/Inputs/EM/Sensor and RGBW devices. It work with direct network connection to the Shelly devices without any hub or needs for Cloud services.
Features summary:
- Really easy to set up
- Auto-discovery
- Auto-IP configuration (survive IP changes)
- Auto-Devices detection
- Auto-Configuration on supported devices
- True Light and Relay Proxies, no need for external driver
- Web View UI for RGBW Color Wheel available on T3
- Battery and Connectivity Monitoring
- Full customization and device configurable functions all available right into Control4
- Bidirectional communication
- Instant feedback using Web Trigger
- Direct network connection with no latency
- No cloud connection, your driver will work forever
- Intelligent driver algorithm that will support most of the current products and adapt to future one
Switch/Relay driver Supported models:
Shelly1, Shelly1PM, Shelly2, Shelly2.5, Shelly4Pro, Shelly Plug/PlugS/PlugUS
Dimmer driver supported models:
Shelly Dimmer/SL, Shelly Vintage, Shelly RGBW2 (in White mode)
RGBW driver supported models:
Shelly RGBW2 (in Color mode), Shelly Bulb
Input Devices supported:
Shelly i3, Shelly Button1, Shelly1, Shelly1PM, Shelly2, Shelly2.5, Shelly Dimmer/SL, Shelly RGBW2
Energy Meter Devices supported:
Shelly EM, Shelly EM3
Sensor Devices supported:
Shelly H&T, Shelly Flood, Shelly Smoke, Shelly Gas, Shelly Door/Window
Limitations:
The Shelly dimmer system only support a configurable fixed ramping, no dynamic (Ramp-To) is possible within Control4.
The Shelly RGBW2 device only support an hard-coded 1 second ramp rate. Every level changes sent to this device will be done with 1 sec ramping.
The Shelly RGBW2 does not support auto-configuration. You will need to copy/paste the Web Trigger URLs if you want to use the RGBW2 Input port or receive instant status feedback. See driver’s documentation for more details.
Battery-powered devices does not support IP-Changes recovery and require to be awake for the driver to identify and configure them,
Please review the Quick Guide instruction manual before setting up your system.
Download Link
Release Notes
Shelly RGBW - Fixed Direct RGBW Set action. Added Auto Gain Control. Fixed Feedback. Shelly Sensor (H&T and other) - Added temperature output compatible with Yatun Software Thermostat
Version 3.0.6 - (October 05, 2021)Added support for the optional temperature module for Shelly1/PM
Version 3.0.5v2 - (September 28, 2021)Added compatibility for latest firmware
Version 3.0.5 - (September 28, 2021) Version 3.0.4 - (May 31, 2021)Fix for April 2021 Shelly firmware release.
Version 3.0.3 - (April 04, 2021)Updated documention for easier integration of the Shelly Motion Bug fix in Shelly Sensor driver.
Version 3.0.2 - (March 11, 2021)Added support the Shelly Motion
Version 3.0.1 - (February 15, 2021)Fix for Input3 and Button1 firmware 1.8.0+ (multiple action URLs)
Version 3.0.0 - (February 04, 2021) Version 3.0.1 - (January 10, 2021)Minor bug fix
Version 3.0.0 - (January 08, 2021)Add support for all Shelly Sensors, some bug fixes and improvement
Version 2.1.0 - (December 21, 2020)Added support for Shelly EM/EM3 and Shelly Duo Minor bug fix
Version 2.0.0 - (November 23, 2020)Added support for Shelly i3/Button1 and all inputs option from other Shelly devices. Added Web Trigger support for instant feedback. Fixed ShellyPlug detection. General improvements and bug fixes.
Version 1.0.1 - (May 06, 2020)Fixed direct RGBW Color Set from Programming action.
Version 1.0.0 - (April 30, 2020) Version 1.0.0. - (April 30, 2020) Version 1.0.0 - (April 30, 2020) Version 1.0Â.0 - (April 30, 2020)Initial release
Version 0.0.1 - (April 28, 2020)Early Alpha