This driver allows you to integrate Reolink NVR Cameras into Control4 Navigators. The driver allows you to view video on the different navigator interfaces and PTZ (if supported by the camera) is also supported by this driver.
- Loads basic camera meta-data into Control4® Composer
- Supports full range PTZ controls (assuming your camera does)
- Supports jumping to 6 presets
Download Link
Release Notes
first public release
- Add driver to DocumentsControl4Drivers directory.
- Launch the Composer Pro application and connect to your project
- In the ‘System Design’ page select the ‘Search’ tab on the right hand side.
- Select ‘Camera’ as the device type.
- Double click on ‘Reolink NVR’ to add to the cameraNote: you will need 1 instance per camera
- In the driver properties enter the correct license key.
- Trial will auto start without entering a key
- Enter the IP Address, http, rtsp ports for the camera
- Enter the correct credentials and select Digest as the authentication method
- In the driver properties set both the SnapChannel # and the Channel # to the correct channel for the NVR.