Dynaudio Studio In-Wall LCR Mid/Tweeter Module

The Dynaudio S4-LCR65MT is a modular woofer and tweeter module that works with a dual woofer module allowing you to custom build your LCR main and center channel speakers to the needs of each project.

The tweeter modules can be placed either way to optimize the system for the listening position, while a rear switch lets you match their power setting to the number of woofer modules you’ve chosen. There’s also a passive filter bypass setting to unlock an unlimited range of fully active LCR system configurations.

The Dynaudio engineers wanted to make it as easy as possible to install a larger array in one go, which is why magnetic fastenings hold everything securely together if you’re not separating the modules.

The LCR65MT requires at least 1 dual woofer module.

Studs being in the way are no longer a problem. The center speaker can be separated and then a large grill can be used to cover the entire row of speakers.

If you happen to get the job in the prewire stage have the builder frame in a box for your center channel..

Here is an example with upgraded L and R speakers.

• Type: 2 Way in-wall
• Tweeter: 28mm (1in)
• Mid/bass: 100mm (4in)
• Freq Response (+-3dB): 250Hz-20kHz
• Impedance (nominal/minimum): 8 Ω / 5 Ω
• Sensitivity: 89±3dB
• Rated Power: 50W
• Long Term Power: 150W
• Tweeter Level Options: -3dB, 0dB, +3dB
• Dimensions: 9.25″W x 8.375″H
• Cut-out Dimension: 7.5″W x 8.3″H
• Depth: 3.5″
• Optional Grill Attachment: Magnetic
• Certifications: CE
• Environmental: RoHS

• (1) Speaker
• (1) Installation Frame
• (1) Cut-Out Template
• (1) Paint Mask
• (1) Document Pack
• (2) Frame Flange