The Just Add Power VBS-HDIP-747POE Transmitter is designed to add 4 HDMI Inputs into your video system. This transmitter is capable of 4K30 4:4:4 with HDR.
Lossless Audio is supported including Dolby Atmos.
This 1U rack mountable transmitter makes your rack trim out clean and easy! The single 110V power plug can be installed in the front or back of the unit giving you options on on your rack. You can also skip the power plug all together and power the units by POE as well.The quiet front facing fans allow you to stack devices right on top of each other with out needing to have a space in between.
Just Add Power 3G series is a 4K/UHD capable IP based video distribution system designed to go above and beyond a traditional matrix switching solution. The feature set fills the requirements of virtually any project, be it residential, commercial, or any other market segment. Using Just Add Powers proprietary encoding process, no fiber or 10GB Cat7 wiring is needed.
The HD over IP™ system work best in conjunction with a Luxul managed network switch to deliver 4K/UHD content over a Local Area Network infrastructure using Cat 5e/6 cable, which allow you to create an HDCP 2.2-compliant Ultra HD video matrix of any size, from 2×2 to 4000 x 65,000, with video wall support, and built-in 4K/1K up/down scaler on the Receivers providing incredible image quality on every integrated display.
HDCP 2.2 support:
3G Ultra HD over IP™ transmitters and receivers are HDCP 2.2 compliant allowing for the integration of any 4K/UHD screens and sources that feature this new protection. The receivers feature a video scaler allowing seamless HDCP™ which converts 4K/UHD HDCP 2.2 encrypted content to 720P or 1080P with HDCP 1.1 protection, allowing you to mix and match new and old displays. This is perfect for clients who don’t want to upgrade every display.
Lossless Audio:
The 747POE transmitter supports all of the lossless audio formats which includes Dolby Atmos. It can pass them on to the 508POE or 518AVP receiver.
Single Switch System Diagram
Multiple Switch Over Fiber Diagram
| Connections | |
|---|---|
| Ethernet | (4) Gigabit Input |
| Power | 802.af POE. Optional 4.7-23 volt input |
| HDMI Input | (4) HDMI Input(Locking Thread Screws) HDCP 2.2 |
| RS232 | (4) RS232 3.5mm Plugs (Null-Model/Straight Through Jumper on bottom of board) |
| Installation | |
| Size | Designed for 19″ Racks. 1U Height 17″ W x 9.8″ D x 1.75″ H |
| Audio Video Specs | |
| Audio Capabilities | Lossless Audio – Dolby Atmos |
| Video Capabilities | 480P,720P,1080P, 2160P |
| Additional Specs | |
| HDMI CEC | CEC control is active on many automation platforms |
| RS232 | Drivers are available to turn this RS232 into an extension of your control systems |
