This module provides complete integration with iPort Surface Mounts with Buttons. It includes commands to change the led color to any color using hex color code. And there are two types of events, one for simple button presses and another that will allow looping for volume ramp while the button is held.
Available TCL Commands
- Set LED Color – Set LED backlighting to any color using hex color code
Available Device Events
- Button Press Event – Trigger a macro based on the press of a button
- While Button Pressed – Triggering a repeat event while a button is pressed until that button is released
File > Import & Restart
This is a two way module that is packaged as a TCM file that needs to be imported in to the Accelerator software. When you click Import TCM FIle here you will need to change the Files of type to Total Control 1.0 Module Library (*.tcm). Then navigate to where you downloaded the Spin – iPort.tcm file and choose it. After you have imported make sure you restart Accelerator in order to complete the installation.
Step 4. Add Other Devices > Confirm & Add
After you have restarted Accelerator go to step 4. and navigate to the module.
My > IP Database > AUX > SPIN > IPORT
When the module is selected make sure that the checkbox is checked in section 8 that says Spin – iPort Main Functions. If not try reimporting and restart Accelerator. Once you are sure you have the checkbox checked. Click Add Selected Module to add the module to your tree.
Step 6. Network Setup
At Step 6. click on Non URC Device and fill in the IP address of the iPort Surface Mount. Port should be left at 10001
Step 11. System Parameters
At Step 11. under Two Way Module Settings from the first drop downs choose the room that the module is located at in the tree and in the second drop down choose the iPort module.
Next in the bottom right under System Parameter Information you will insert your BlackWire module license key where it say license=.