Hikvision Pro Series NVR’s 9600 and 7700 Series
Account RequiredLog-In or Register to view pricing.
SKU: MFS-HIK9600-F4 Categories: Control4, Surveillance, IP Camera (Navigator) Tag: manfell Brand: Manfell
The Hikvision Pro Series NVR Control4 Driver License is for installations using EA controllers and T3 touchscreens
This driver is works with the following Model Numbers only and must be on firmware 4.1.11 and above.
The following 9600 series – DS-9632NI-I8, DS-9664NI-I8, DS-96124NI-I24/H, DS-96256NI-I24/H all of cameras are on POE+ switches and added to NVR
The following 7700 series – DS-7716NI-I4/16P, DS-7732NI-I4/16P, DS-7732NI-I4
International model numbers may be different, Check the firmware version and your support site to see if you have the right firmware.
The firmware on your NVR needs to be 4.1.11 and above available from http://tech.hikvisionusa.com/8-firmware/6-nvr
By using the sub stream of the cameras we now have no restrictions on the record quality on the NVR.
In the past the drivers used the main stream and where restricted to 720p for best display on T3 with no green lines.
- 256 channels are provided.
- Use the channels you need for your NVR
- This works on EA controllers T3 touchscreen, iOS and android Navigator.
- Only still screen shot is displayed on legacy touchscreens or controllers, this will not change in the future.
- Follow the pdf setup instructions.
- All drivers are tested on all firmware updates as they are released for a minimum of 100 hours.
- This only works on 2.8.1 and above.
- This works on EA controllers T3 touchscreen, iOS and android Navigator.
- Only still screen shot is displayed on legacy touchscreens or controllers, this will not change in the future.
- The firmware on your NVR needs to be 4.1.11 and above available from http://tech.hikvisionusa.com/8-firmware/6-nvr
Download Link
Ver 96 - Jan 26 2018
Dealer Demo
72hr Trial