For EA controllers and T3 touchscreens, iOs and android navigators.
This driver has been tested for more than 100 hours.
W Box Technologies is ADI’s House Brand of IP Cameras and NVRs
If you are not using a NVR, you will have to use an external POE Switch to run these cameras
Why should you use H264 on sub stream in cameras and NVRs?
We as Control4 dealers until the EA1, EA3, EA5 controllers and T3 touchscreens and 2.8.1 composer was released,
had to set the main stream to H264 and limit it to 720p because that was the best setting on the T3 touchscreens (no green lines) and the sub stream to MPEG. This would limit what a NVR resolution it could record at.
Now that we can use H264 on all our projects, I have written all my drivers to take advantage of the sub stream set to display H264 at 640*480 or 704*480 for the projects.
The main stream H264 now can be set at maxium resolution to record on NVR
Now the police will be able to identify the suspects.
For projects using 2.8.1 and above only.
Only still screen shot is displayed on legacy touchscreens or controllers, this will not change in the future.
Follow the setup instructions.
All drivers are tested on all firmware updates as they are released for a minimum of 100 hours.