Are you picking the right CAMERA or NVR DRIVER?
The Hikvision Camera Driver H264 Sub Stream is to be used if the cameras are plugged into a POE switch (Note use POE+ switch for best results) and not connected to NVR.
The Hikvision DS-7600 Series NVR Control4 Driver License is for new installations using latest controllers and touchscreens and cameras are plugged into the NVR. Note if you have a few ip cameras plugged into poe+ switches if you have room on nvr add manually,
The Hikvision DS-7716 Series NVR Control4 Driver License is for legacy installations. Use this if you have no current controllers or touchscreens.
Here is the Hikvision NVR driver for Legacy Systems.
Hikvision DS-7716 series NVR firmware only has H264 and MPEG settings using Virtual host when plugging in cameras directly to the NVR.
16 channels are provided.
This works on Legacy controllers, Legacy touchscreens iOS and android Navigator.
Follow the setup instructions.
All drivers are tested on all firmware updates as they are released for a minimum of 100 hours.
- Allows DS-7716 NVR to work with legacy controllers to provide still and motion video to navagators
- This driver only works on C4OS 2.8.0 and above