The AudioControl RS 500 DSP controlled subwoofer amplifier is the ultimate bass amplification solution for any home cinema, multi-zone audio, or 2.1 channel music system.
The RS Series amplifiers deliver constant power at all common impedances. Like other models in the AudioControl lineup, RS Series amplifiers offer IP and IR control, as well as loop outputs with an optional high-pass filter.
These features, coupled with the power of AudioControl’s multi-award-winning DSP engine that puts graphic and parametric EQs, crossover, delay and phase control at your fingertips for precise calibration and tuning, make the RS Series amplifiers a definitive choice to power any subwoofer in entertainment systems that demand the very best.
- 500 Watts at 8/4/2 Ohms
- Digital Signal Processing (DSP) Performance
- Six-band Graphic EQ
- Eight-band Parametric EQ
- Crossover with Subsonic Filter
- Built-In Speaker Optimization Profiles
- Ethernet Port for Status Monitoring, Source Switching and 12 Volt Trigger Control
- Network Programmable Graphic & Parametric Equalization with User Memories
- Digital Signal Sense
- AudioControl LightDrive Anti-Clipping Speaker Protection
- Balanced Inputs/Thru
- Unbalanced Input/Thru
- LFE Input/Thru
- Speaker Level Inputs
- Home and Commercial Installations
Inputs
Inputs: 1 Balanced
Inputs: 2 Unbalanced
Inputs: 1 LFE
Inputs: 2 Speaker Level
Outputs
Amplifier Channels: 1
Power Output Continuous: 500 watts
Minimum Speaker Load: 2Ω
Stereo Passthrough: 1
LFE Passthrough: 1
Control
Remote Power Trigger: +12 VDC or Dry contact
Network: Ethernet control
12V Trigger Outputs: 1
IR Receiver Input: 1
Weight & Dimensions
Dimensions: 17”W x 17.5”D x 1.75”H
Weight: 14.9 labs
In The Box
- (1) RS500 Amplifier
- (1) Power Cord
- (1) Manual
The Dynaudio subwoofer is supported by this amplifier with built in speaker profiles.