- 40Gbps HDMI Extender via Optical Fiber
- Noise-immune, long distance transmission over multi-mode fiber
- 4K/120fps capable with 8K up to 40 Gbps bandwidth (8K/60, 4:2:0)
- HDMI 2.1 feature-rich, including Auto Low Latency, Variable Refresh Rate, Quick Frame
- Transport, and Source Based Tone Mapping
- HDCP 2.3 (and all earlier versions supported)
- Comprehensive EDID management for mixed-systems
Key benefits of using AC-EXO-X-KIT:
Multi-mode OM2/3/4 Compatible: The AC-EXO-KIT may be used with all classifications of multi-mode fiber. Total distance varies per classification. Using a 40Gbps, 8K/60Hz 4:2:0 signal, the following distances have been confirmed: OM2 / 40 meters, OM3 / 200 meters, OM4 / 300 meters.
Long Distance Transmission: HDMI signals may be extended up to 300 meters using OM4 multi-mode fiber, safely delivering content with zero loss of fidelity in the most challenging installations.
HDMI 2.1 Features: Auto Low Latency, Variable Refresh Rate, HDR10 and Dynamic HDR formats including Dolby Vision, HDR10+ and HLG, Quick Frame Transport and Source Based Tone Mapping. 8K/60 4:2:0, High Frame Rate 4K/120fps capable.
Near-Zero Latency: Latency is less than 8 microseconds, measurable but visually imperceptible.
Dual HDMI Output: The AC-EXO-KIT receiver features two HDMI outputs, with HDMI 1 full-bandwidth passthrough and HDMI 2 an always scaled output. Scaling can be selected to be 8K to 4K, 8K to 1080p, and 4K to 1080p.
Comprehensive EDID Management: Today’s leading-edge NextGen systems must now contend with mixed resolutions of 8K, 4K and in application-specific circumstances legacy HD displays, with the potential for EDID conflicts ever-present. The AC-EXO-KIT is equipped with a robust EDID management system that enables juggling video resolutions and audio codec combinations for EDIDs that provide a congenial match for reliable system operation.
An EDID Copy function allows for acute copying and saving of known, working EDIDs, for stable kit operation and HDCP repeatability.
Onboard Troubleshooting: Leave your Fox & Hound test kit behind in the shop? The AC-EXO-KIT has you covered. Where required, the transmitter can generate a 1080p or 4K test pattern to aid with fiber verification, connected device configuration settings, or source viability.
Control Options: Configurable, bidirectional management for IR & RS-232 signals provides a carefully nuanced added plus to the AC-EXO-KIT, consolidating wiring to a solitary pull and mitigating the use of supplemental devices for a clean, efficient installation. Simplified control requirements can take advantage of the AC-EXO-KIT’s I-PASS, forwarding commands directly from a control system IR-out port into the TX unit I-PASS input, proceeding to the receiving end and routing directly from the RX unit’s IR-out into the display’s IR input jack (if equipped) or through an attached supplied IR emitter.
ESD (electrostatic discharge) protection adds a welcomed layer of defense for all connected products.
Full Feature Set
- Noise-immune, long distance transmission over multi-mode fiber
- Proprietary hyper-precise, beam-focusing lens assembly limits transmission refraction and downline light scatter with minimal attenuation
- An AVPro Edge custom algorithm monitors Fixed Rate Link status and restrains Link Training bandwidth reductions
- Fiber delivers a pristine image down to the last molecule of detail, an essential requirement for transporting content to 8K displays
- High Frame Rate 4K/120fps capable with 8K up to 40 Gbps bandwidth (8K/60, 4:2:0)
- Receiver features dual-HDMI outputs with an always-scaled, secondary output (selectable as 8K to 4K, 8K to 1080p, or 4K to 1080p)
- HDMI 2.1a feature-rich, including Auto Low Latency, Variable Refresh Rate, Quick Frame Transport, and Source Based Tone Mapping
- Comprehensive EDID management for mixed-resolution NextGen systems
- Configurable, bidirectional IR & RS-232 control signal management consolidates wiring to a solo pull, eliminating supplemental devices
- Supports HDR10, plus Dynamic HDR formats including Dolby Vision, HDR10+ and HLG with imperceptible, near-zero latency
- HDCP 2.3 (and all earlier versions supported)