The MaxColor 4K60 Transmitter natively supports 4K60 input, allowing you to distribute 4K UHD video from the growing number of 4K sources with no downscaling or subsampling. With MaxColor, 4K60 4:4:4 12 Bit Video can be distributed over a 1Gb managed network using Cat5E or Cat6, eliminating the need to upgrade to fiber or 10 gigabit network switches. HDR10, HDR10+, HLG and Dolby Vision are all supported. All lossless audio formats are accepted however they must be set to stereo if you wish to use the built in analog outputs.
IR and RS232 output is built in and can be controlled by most control systems. This enables you to control a device in the rack via the automation system.
Note: There is not currently a down mixing audio model available.
| Connections | |
|---|---|
| Ethernet | (1) Gigabit Input |
| Power | 802.af POE. Optional 4.7-23 volt input |
| HDMI Input | (1) HDMI Input(Locking Thread Screws) HDCP 2.2 |
| IR | (1) 3.5MM Plug. Automation system required for use. |
| RS232 | (1) RS232 3.5mm Plugs (Null-Model/Straight Through Jumper on bottom of board) |
| Analog Audio Output | (1) 3.5mm – capable of 2 channel PCM |
| Installation | |
| Size | 6.7″ W x 5″ D x 1.2″ H |
| Audio Video Specs | |
| Video Capabilities | 480P,720P,1080P, 2160P |
| Additional Specs | |
| HDMI CEC | CEC control is active on many automation platforms |
| RS232 | Drivers are available to turn this RS232 into an extension of your control systems |
