The Just Add Power VBS-HDIP-767DSS Dante Audio Transmitter is designed to add an HDMI Input into your video system. This transmitter is capable of 4K30 4:4:4 with HDR.
With Dante and AES67 Support built in, your audio needs have never been so easy! The 767DSS has a total of 8 channels of audio available that can go either direction. You can input up to eight audio channels from the J+P system for play-out on Dante-enabled and AES67 devices, and extract up to eight channels from the audio network for play-out across the J+P system.
Mix and Match: The 3G+ Dante Transmitter is fully compatible with all 2G Omega and 3G Devices.
Simplifying rack wiring, the transmitter is powered by POE but can optionally be powered by a power supply.
Just Add Power 3G series is a 4K/UHD capable IP based video distribution system designed to go above and beyond a traditional matrix switching solution. The feature set fills the requirements of virtually any project, be it residential, commercial, or any other market segment. Using Just Add Powers proprietary encoding process, no fiber or 10GB Cat7 wiring is needed.
The HD over IP™ system work best in conjunction with a Luxul managed network switch to deliver 4K/UHD content over a Local Area Network infrastructure using Cat 5e/6 cable, which allow you to create an HDCP 2.2-compliant Ultra HD video matrix of any size, from 2×2 to 4000 x 65,000, with video wall support, and built-in 4K/1K up/down scaler on the Receivers providing incredible image quality on every integrated display.
HDCP 2.2 support:
3G Ultra HD over IP™ transmitters and receivers are HDCP 2.2 compliant allowing for the integration of any 4K/UHD screens and sources that feature this new protection. The receivers feature a video scaler allowing seamless HDCP™ which converts 4K/UHD HDCP 2.2 encrypted content to 720P or 1080P with HDCP 1.1 protection, allowing you to mix and match new and old displays. This is perfect for clients who don’t want to upgrade every display.
Single Switch System Diagram
Multiple Switch Over Fiber Diagram
|Ethernet||(1) Gigabit Input|
|Power||802.af POE. Optional 4.7-23 volt input|
|HDMI Input||(1) HDMI Input(Locking Thread Screws) HDCP 2.2|
|HDMI Output||(1) HDMI Passthrough Output(Locking Thread Screws) HDCP 2.2|
|RS232||(1) RS232 3.5mm Plugs (Null-Model/Straight Through Jumper on bottom of board)|
|Size||7.2″ W x 6.0″ D x 1.2″ H|
|Audio Video Specs|
|Audio Capabilities||8 channels of Dante Audio. Also compatible with AES67|
|Video Capabilities||480P,720P,1080P, 2160P|
|RS232||Drivers are available to turn this RS232 into an extension of your control systems|