BlackWire has found that Araknis routers do not support Just Add Power Layer 3 functions such as Video Wall, CEC control, RS232, or Video Tiler commands on any system configured with the JAD Config software.

BlackWire highly recommends using a router that is 100% compatible or setting the automation controller’s gateway address to be the IP address of the JAD Config configured switch. This will allow the automation system to communicate with the J+P end point devices.

BlackWire Recommended routers are:


Sold By:BlackWire

Account Required
Log-In or
Register to view pricing.


Sold By:BlackWire

Account Required
Log-In or
Register to view pricing.

in Networking Setup

0

0